Dual Frequency Eight Channel Anti-Interference Terminal

• Customization: Available
• Operating Temperature: -40℃~+55℃
• Storage Temperature: -55℃~+70℃
• Model NO.: TX-007Pro-8CH-DF-WG-DR
• Relative Humidity: Temperature 40℃; Humidity: 96%
• Rain: Satisfy The Gjb150A Rain Test Requirements
• Color: French Grey
• Timing Accuracy: ≤100ns
• Working Voltage: Input Voltage 5~17V
• Power Consumption: ≤ 10W
• Speed Measurement Accuracy: ≤0.2 Meters/S
• Positioning Accuracy: Horizontal≤1.5 Meters
• Unidirectional Interference: ≥ 95dB
• Three-Direction Interference: ≥ 85dB
• Working Frequency: Bds-B1:1561.098MHz;GPS-L1:1575.42MHz
• Transport Package: Flight Case
• Specification: 130mm×135mm×38mm
• Trademark: JDY
• Origin: China
• HS Code: 8543709960
• Production Capacity: 200pieces/Month

Product Description

Product Description

TX-007Pro-8CH-DF-WG-DR

Product Overview:

This product model is TX-007Pro-8CH-DF-WG-DR: dual-frequency 8-channel anti-interference, serving unmanned aerial vehicles, unmanned vehicles and other reliable navigation and other fields, protecting user terminals from all kinds of unintentional interference, malicious attacks, and greatly improving PNT information security

Application Scenarios:

1. Time service security in the fields of electric power, communication and finance.

2. Navigation security of unmanned aerial vehicles, unmanned vehicles and unmanned ships.

3. Fleet defense navigation security.

4. High-end logistics navigation security

Core Features & Advantages

Product Features:
1. This product is dual-frequency 8-channel anti-interference.

2. The main working frequency point B1L1 can also configure the second frequency point.

3. Anti-jamming function can suppress narrow-band interference, broadband interference, pulse interference, sweep frequency interference, Gaussian interference and other pressure interference.

4. Built-in full-frequency point navigation and positioning module, according to the NMEA0183 protocol output information.

5. Can use serial port output or RF port output.

6. The software upgrade has the function of software upgrade, which can upgrade the software of anti-interference module and receiver module through the serial port.

7. The system self-test has the functions of self-test and state inspection.

 8. The anti-burning function The anti-continuous wave power is not less than 10W29. Safety with overvoltage protection, reverse connection protection, etc.

Electrical Performance:
1. Working frequency BDS-B1:1561.098 MHzGPS-L1:1575.42 MHz

2. Anti-interference performance Single interference-to-signal ratio: ≥ 95dB, Three interference-to-signal ratio: ≥ 85dB

3. Positioning accuracy level ≤ 1.5 m

4. Speed measurement accuracy ≤ 0.2 m/s

5. Timing accuracy ≤ 100 ns

6. Operating voltage Input voltage 5~17V3

. Power consumption≤ 10W

Interface Definition:
1. Power/Data Interface:Optional J30J-9ZK Core Connector 

2. RF interface

1) Anti-interference signal output interface adopts SMA connector and is in the form of one-wire communication

2) Output B1\L1 signal level is -70 ~-60dBm

Contour Structure
1. Overall dimension :130mm×135mm×38mm

2. Weight ≤ 400g

3. Color: light gray

Environmental adaptability

1. Working temperature:-40 ℃ ~ +55 ℃

2. Storage temperature:-55 ℃ ~ +70 ℃

3. Relative humidity: temperature 40 ℃; Humidity: 96%

4. Rain: meet the GJB150A rain test requirements

Main Functions:

Description of connection relationship
 1. The electrical signal connection between the product and the platform carrier is interconnected by low-frequency data.
 2. This product built-in locator, can replace the regular positioning terminal and antenna.
3. RF signal access mode, this product replaces the regular active antenna. When using the RF interface of this product for connection, please ensure that the interface of the access party does not provide more than 5V power to this product to avoid possible power conflict or damage
4. When using the usb to TTL tool to connect with the computer, do not plug or unplug the usb with electricity to avoid damage to the serial port

Installation and use

1. Fixation Use M3 screws to install and fix.

2. The power supply uses XT30 power supply, the power supply voltage is 5-17V, the maximum does not exceed 17V, it is recommended to use 12V.

3. Positioning data connection

1) Connect the TTL serial port of the DuPont line of this product to the GNSS serial port of the flight control. Use the matching data cable provided by the product to connect to the GNSS serial port of the flight control. Connect one end of the data line labeled TX to the RX interface of the flight control, one end labeled RX to the TX interface of the flight control, and one end labeled GND to the GND interface of the flight control.

2) Use the SMA cable to connect the RF port of the product to the antenna port of the drone positioner. Note: serial port and radio frequency port can choose one of two

Interface with flight control protocol

This product outputs nmea 0183 protocol

Main Products

Company Profile

Aegiscloud(Shenzhen) Technology Innovation Co.,Ltd. is located in the LongGang of Shenzhen City, focusing on the research and development of low altitude unmannedaerial vehicle defense products and low altitude safety supervision systems. We arecommitted to improving the management and control system of low altitudeunmanned aerial vehicles and becoming a pioneer in escorting urban low altitudeeconomy.

The company has developed a dual end solution (remote identification of lowaltitude networked aircraft and comprehensive control of low altitude nonnetworked unmanned aerial vehicles);The drone defenseproduct series has effectively promoted the development of product categories andtechnologies in the anti drone market, leading the construction of the ShenzhenLongGang District Low altitude Supervision Pilot Center.

The company currently has a JDY (200-2000) drone jammingproduct series, covering innovative technology products suchas portable, fixed, vehicle mounted backpack, etc; At present,it has been deeply applied in a wide range of industries such as border defense, civil defense, judicial andpublic security, energy, and major security sites.

Certifications

The company has over 30 independent intellectual propertyrights, various patent certificates, software copyrights, producttesting reports, and more. Recognized as a national high-techenterprise, technology-based small and medium-sizedenterprise, and software enterprise.

Exhibitions

Packaging & Shipping

FAQ

Q1: Who are you, and what do you do?
A1: We are a R&D-driven high-tech company, specialized in the R&D, production and sales of signal amplifiers, wireless signal control systems, wireless signal countermeasure equipment, wireless signal blocking equipment, and explosion-proof jamming equipment.

Q2: Are you a manufacturer or a trading company?
A2: We are a manufacturer. Our factory is located in Longgang District, Shenzhen City, Guangdong Province, and we welcome you to visit us.

Q3: Do you accept custom-made products?
A3: Yes, we can customize products according to customers' requirements, including different frequencies, power levels, sizes, as well as custom packaging and laser-engraved logos based on specific needs.

Q4: What about the delivery time?
A4: Generally speaking, the delivery time for regular order quantities is 1 to 3 months. However, for large orders, please confirm further details with us.

Q5: What about labels and logos?
A5: Custom labels and logos are available.

Q6: What is the minimum order quantity (MOQ)?
A6: The MOQ varies by product, ranging from 1 to 20 units.

Q7: What should I do if the received product is defective?
A7: Our strict quality control ensures a 100% qualification rate. However, products may get damaged during transportation. Please share photos or videos of the defective product to let us know the specific issue. We will provide compensation accordingly, or send you replacement parts or a new product. All purchased products come with a 1-year warranty and technical support.