Advanced Mini Satellite Navigation Device with Jamming Protection Drone Jammer

• Customization: Available
• Weight: ≤130g
• Color: Gray
• Model NO.: TX-S65-4 CH-SNB
• Operating Temperature: -40℃ ~+ 55℃
• Storage Temperature: -55℃ ~+ 70℃
• Relative Humidity: Temperature: Temperature: 40℃; Humidity: 96%
• Rain: Meet The Requirements of Gjb150A Rain Test
• Frequency of Work: B1I:1561.098MHz;L1/B1c:1575.42MHz
• Speed Measurement Accuracy: 0.2 M / Second (95%)
• Time-Giving Accuracy: ≤100ns(95%)
• Operating Voltage: The Input Voltage Is 5 to 17 V
• Power Consumption: ≤6W
• Transport Package: Flight Case
• Specification: 65*65*21mm
• Trademark: JDY
• Origin: China
• HS Code: 8543709960

Product Description

Product Description

TX-S65-4 CH-SNB

Product Overview:

TX-S65-4 CH-SNB ultra-miniaturization anti-interference all-in-one machine is a satellite navigation anti-interference all-in-one machine for the needs of small and medium-sized UAV and other industries, which supports the anti-broadband interference ability and positioning function of Beidou B1 and GPS frequency point signals. Internal integrated antenna array, anti-jamming components and satellite navigation receiver, with miniaturization, lightweight, and low cost characteristics.

Application Scenarios:

1. Power, communications, finance and other fields of time security

2. Uaerial vehicles, unmanned vehicles, unmanned ships and other navigation safety

3. Convoy defense and navigation security

4. High-end logistics and navigation security

Core Features & Advantages

Product function:

1. RNSS signal reception

1) With the function of receiving RNSS signals from navigation satellites such as Beidou-3 and GPS

2) Civil code: B1C, B1I, and GPS L1

2. Anti-interference function

With the anti-interference function of B1 and L1 frequency points, it can suppress narrowband interference, broadband interference, pulse interference, sweep interference, Gaussian interference and other suppression interference

3. Software upgrade

With the software upgrade function, you can upgrade the anti-interference module and the receiver module through the serial port

4. System self-inspection

It has self-check and status inspection functions

5. Anti-burning function

The continuous W power is not less than 10W

Behaviour of electricity:

1. Frequency of work

    B1I:1561.098MHz;L1/B1C:1575.42MHz

2. Anti-interference performance

    Unidirectional interference ≥ 95dBc

    Two-direction interference ≥ 85dbc

    Three-direction interference ≥ 80dBc

3. Positioning accuracy

    Horizontal oneself 10 meters

    The height is 15 meters

4. Speed measurement accuracy

    0.2 m / second (95%)

5. Time-giving accuracy

    ≤100ns(95%)

6. Operating voltage

    The input voltage is 5 to 17 V

7. Power consumption

     ≤6W

Shape structure:
1. Appearance size :65mm×65mm×21mm

2. Weight ≤130g

3. Color: grey

Environmental adaptability

1. Working temperature:-40 ℃ ~ +55 ℃

2. Storage temperature:-55 ℃ ~ +70 ℃

3. Relative humidity: temperature 40 ℃; Humidity: 96%

4. Rain: meet the GJB150A rain test requirements

Interface definition

The interface definitions are shown in the following table:

No.	code name	Connector  model	functional  description
1	TX	SMA-KFD	GNSS RF output port,reserved
2	data	J30J-9ZKP	5~17V power supply input and serial port

 Power supply / data interface

The J30J-9 ZK core connector is selected, and the pin is defined as follows:

Pin No.	name	direction	electrical  level	remarks
1	Power positive pole	import	5~17V	Recommended 12V
2	Power positive pole	import	5~17V	Recommended 12V
3	Power anode	import
4	Power anode	import
5	TXD0	output	TTL	Upgrade with serial port
6	RXD0	import	TTL
7	RXD1	output	TTL	Anti-interference serial port
8	TXD1	import	TTL
9	GND	import	TTL

Main Functions:

Description of connection relationship
1. The telecommunication signal connection between the product and the platform carrier isconnected by low frequency data method.
2. The product has a built-in locator that can replace the conventional positioning terminal andantenna.
3. In RF signal access mode, this product replaces the conventional active antenna. Whenconnecting using the RF interface of this product, please ensure that the interface of the connectedparty does not provide an over 5V power supply to this product to avoid possible power conflictsor damage. As shown in the following diagram.
4. When using the usb to TTL tool to connect with the computer, do not plug or unplug the usb with electricity to avoid damage to the serial port

Installation and use

1.    fixed

     Install fixation with M 2 screws.

2.    supply electricity

     Use XT 30 power supply, power supply voltage 5-17V, maximum not exceeding 17V, recommended to use 12V.

3.     Locate the data connection

     1)  Connect the DuPont line TTL serial port of this product to the flight control GNSS serial port.

          Connect the flight control to the GNSS serial port using the matching data line provided by this product. Connect one end of the data line label TX to            the flight control RX interface, one end of the label RX to the flight control TX interface, and one end of the label GND to the flight control GND         interface.

    2) Use the SMA cable to connect the RF port of the product to the antenna port of the UAV locator.

Interface with flight control protocol

This product shall output nmea, protocol or ublox protocol, and the flight control shall be set to receive either of these two protocols. Please ask the customer to complete the agreement docking work with our technical personnel before placing an order

Main Products

Company Profile

Aegiscloud(Shenzhen) Technology Innovation Co.,Ltd. is located in the LongGang of Shenzhen City, focusing on the research and development of low altitude unmannedaerial vehicle defense products and low altitude safety supervision systems. We arecommitted to improving the management and control system of low altitudeunmanned aerial vehicles and becoming a pioneer in escorting urban low altitudeeconomy.

The company has developed a dual end solution (remote identification of lowaltitude networked aircraft and comprehensive control of low altitude nonnetworked unmanned aerial vehicles);The drone defenseproduct series has effectively promoted the development of product categories andtechnologies in the anti drone market, leading the construction of the ShenzhenLongGang District Low altitude Supervision Pilot Center.

The company currently has a JDY (200-2000) drone jammingproduct series, covering innovative technology products suchas portable, fixed, vehicle mounted backpack, etc; At present,it has been deeply applied in a wide range of industries such as border defense, civil defense, judicial andpublic security, energy, and major security sites.

Certifications

The company has over 30 independent intellectual propertyrights, various patent certificates, software copyrights, producttesting reports, and more. Recognized as a national high-techenterprise, technology-based small and medium-sizedenterprise, and software enterprise.

Exhibitions

Packaging & Shipping

FAQ

Q1: Who are you, and what do you do?
A1: We are a R&D-driven high-tech company, specialized in the R&D, production and sales of signal amplifiers, wireless signal control systems, wireless signal countermeasure equipment, wireless signal blocking equipment, and explosion-proof jamming equipment.

Q2: Are you a manufacturer or a trading company?
A2: We are a manufacturer. Our factory is located in Longgang District, Shenzhen City, Guangdong Province, and we welcome you to visit us.

Q3: Do you accept custom-made products?
A3: Yes, we can customize products according to customers' requirements, including different frequencies, power levels, sizes, as well as custom packaging and laser-engraved logos based on specific needs.

Q4: What about the delivery time?
A4: Generally speaking, the delivery time for regular order quantities is 1 to 3 months. However, for large orders, please confirm further details with us.

Q5: What about labels and logos?
A5: Custom labels and logos are available.

Q6: What is the minimum order quantity (MOQ)?
A6: The MOQ varies by product, ranging from 1 to 20 units.

Q7: What should I do if the received product is defective?
A7: Our strict quality control ensures a 100% qualification rate. However, products may get damaged during transportation. Please share photos or videos of the defective product to let us know the specific issue. We will provide compensation accordingly, or send you replacement parts or a new product. All purchased products come with a 1-year warranty and technical support.