Dual Frequency 8-Channel Wireless Signal Enhancer for Clear Communication Drone Jammer

• Customization: Available
• Transport Package: Flight Case
• Specification: 130mm×135mm×38mm
• Model NO.: TX-007Pro-8CH-DF-WG-DR
• Trademark: JDY
• Origin: China
• HS Code: 8543709960
• Production Capacity: 200pieces/Month

Product Description

Product Description

TX-009Pro-8CH-BD-WG-DT

Product Overview:

This product model is TX-009-8CH-BD-WG-DT: dual-band 8-channel anti-jamming, it is a miniaturized satellite navigation anti-jamming integrated device designed for civilian drones and industry users, supporting the reception of dual-band signals from BeiDou-2, BeiDou-3 RNSS B1/B3, and GPS L1, supporting dual-system anti-band jamming capability, with a maximum jamming resistance of 3. It integrates an antenna array, anti-jamming components, and a satellite navigation receiver, serving reliable navigation fields such as drones and unmanned vehicles, protecting user terminals from various unintentional and malicious attacks, significantly enhancing PNT information security

Application Scenarios:

 1. Time synchronization security in power, communications and finance

2. Navigation safety for drones, unmanned cars and unmanned ships

 3. Vehicle defense navigation safety

4. High-end logistics navigation safety

Core Features & Advantages

Product function:
1. This product is dual frequency 8 channel anti interference

2. RNSS signal reception 1) It has the function of receiving RNSS signals from Beidou-2, Beidou-3 and GPS navigation satellites 2) Civil code: B1C, B3I, L1C/A

3. Anti-interference function It has anti-jamming function with B1C, B3I and L1C/A dual frequency points, which can suppress narrowband interference, broadband interference, pulse interference, sweep interference and Gaussian interference2

4. Built-in full frequency point navigation and positioning module, output information according to NMEA0183 protocol.

5. Serial port output or RF port output can be used.

 6. Software upgrade It has the function of software upgrade, which can be upgraded through serial port interference fighting module and receiver module

7. System self-inspection It has self-inspection and status inspection functions

8. Fire resistance function The anti-continuous wave power shall not be less than 10W

9. Safety Overvoltage protection, reverse connection protection, etc

Behaviour of electricity:
1. Working frequency BDS-B3:1268.52MHz±10.23MHz BDS-B1:1575.42MHz±16.368MHz GPS-L1:1575.42MHz±16.368MHz

2. Anti-interference performance Unidirectional interference: ≥95dB, Three-direction interference: ≥85dB3

3. Positioning accuracy Horizontal≤1.5 meters

4. Speed measurement accuracy ≤0.2 m/s

5. Timing accuracy ≤100ns

6. Working voltage Input voltage 5~17V

7. Power consumption ≤17W

Interface definition:
1. Power/data interface The J30J-9ZK core connector is selected, and the pin definition is as follows:

2. RF interface

 1) Anti-interference signal output interface, using SMA connector and in the form of one line

 2) The signal level of output B3/B1 is-70~-60dBm

Shape structure:
1. Appearance size 150mm×130mm×26.5mm

2. Weight ≤500g

3. Color: French grey

Environmental adaptability

1. Working temperature:-40 ℃ ~ +55 ℃

2. Storage temperature:-55 ℃ ~ +70 ℃

3. Relative humidity: temperature 40 ℃; Humidity: 96%

4. Rain: meet the GJB150A rain test requirements

No.	name	direction	electrical  level	remarks
1	Positive pole	import	5~17V	Recommended 12V
2	Positive pole	import	5~17V	Recommended 12V
3	Negative pole	import
4	Negative pole	import
5	RXD0	import	TTL	Upgrade to serial port
6	TXD0	output	TTL
7	RXD1	outpu	TTL	Anti-interference serial port
8	TXD1	import	TTL
9	GND	import	TTL

Main Functions:

Description of connection relationship
1. The telecommunication signal connection between the product and the platform carrier isconnected by low frequency data method.
2. The product has a built-in locator that can replace the conventional positioning terminal andantenna.
3. In RF signal access mode, this product replaces the conventional active antenna. Whenconnecting using the RF interface of this product, please ensure that the interface of the connectedparty does not provide an over 5V power supply to this product to avoid possible power conflictsor damage. As shown in the following diagram.
4. When using the usb to TTL tool to connect with the computer, do not plug or unplug the usb with electricity to avoid damage to the serial port

Installation and use

1. Fixation Use M3 screws to install and fix.

2. The power supply uses XT30 power supply, the power supply voltage is 5-17V, the maximum does not exceed 17V, it is recommended to use 12V.

3. Positioning data connection

1) Connect the TTL serial port of the DuPont line of this product to the GNSS serial port of the flight control. Use the matching data cable provided by the product to connect to the GNSS serial port of the flight control. Connect one end of the data line labeled TX to the RX interface of the flight control, one end labeled RX to the TX interface of the flight control, and one end labeled GND to the GND interface of the flight control.

2) Use the SMA cable to connect the RF port of the product to the antenna port of the drone positioner. Note: serial port and radio frequency port can choose one of two

Interface with flight control protocol

This product outputs nmea 0183 protocol

Main Products

Company Profile

Aegiscloud(Shenzhen) Technology Innovation Co.,Ltd. is located in the LongGang of Shenzhen City, focusing on the research and development of low altitude unmannedaerial vehicle defense products and low altitude safety supervision systems. We arecommitted to improving the management and control system of low altitudeunmanned aerial vehicles and becoming a pioneer in escorting urban low altitudeeconomy.

The company has developed a dual end solution (remote identification of lowaltitude networked aircraft and comprehensive control of low altitude nonnetworked unmanned aerial vehicles);The drone defenseproduct series has effectively promoted the development of product categories andtechnologies in the anti drone market, leading the construction of the ShenzhenLongGang District Low altitude Supervision Pilot Center.

The company currently has a JDY (200-2000) drone jammingproduct series, covering innovative technology products suchas portable, fixed, vehicle mounted backpack, etc; At present,it has been deeply applied in a wide range of industries such as border defense, civil defense, judicial andpublic security, energy, and major security sites.

Certifications

The company has over 30 independent intellectual propertyrights, various patent certificates, software copyrights, producttesting reports, and more. Recognized as a national high-techenterprise, technology-based small and medium-sizedenterprise, and software enterprise.

Exhibitions

Packaging & Shipping

FAQ

Q1: Who are you, and what do you do?
A1: We are a R&D-driven high-tech company, specialized in the R&D, production and sales of signal amplifiers, wireless signal control systems, wireless signal countermeasure equipment, wireless signal blocking equipment, and explosion-proof jamming equipment.

Q2: Are you a manufacturer or a trading company?
A2: We are a manufacturer. Our factory is located in Longgang District, Shenzhen City, Guangdong Province, and we welcome you to visit us.

Q3: Do you accept custom-made products?
A3: Yes, we can customize products according to customers' requirements, including different frequencies, power levels, sizes, as well as custom packaging and laser-engraved logos based on specific needs.

Q4: What about the delivery time?
A4: Generally speaking, the delivery time for regular order quantities is 1 to 3 months. However, for large orders, please confirm further details with us.

Q5: What about labels and logos?
A5: Custom labels and logos are available.

Q6: What is the minimum order quantity (MOQ)?
A6: The MOQ varies by product, ranging from 1 to 20 units.

Q7: What should I do if the received product is defective?
A7: Our strict quality control ensures a 100% qualification rate. However, products may get damaged during transportation. Please share photos or videos of the defective product to let us know the specific issue. We will provide compensation accordingly, or send you replacement parts or a new product. All purchased products come with a 1-year warranty and technical support.