Pepper Spray Mini-7-Element Multi-System Satellite Navigation Drone Jammer Anti-Jamming All-in-One

• Customization: Available
• Weight: ≤1200g
• Color: French Grey
• Model NO.: TX2504-3T7A21C-WG-DT
• Working Temperature: -40℃~+55℃
• Storage Temperature: -55℃~+70℃
• Relative Humidity: Temperature 40℃; Humidity: 96%
• Rain: Meet The Rain Test Requirements of Gjb150A
• Power Consumption: ≤25W
• Working Voltage: Input Voltage 6~33V
• Timing Accuracy: ≤100ns(95%)
• Speed Measurement Accuracy: ≤ 0.2 M/S (95%)
• Positioning Accuracy: Level <1.5 M
• Transport Package: Flight Case
• Specification: Φ220*29.5mm
• Origin: China
• HS Code: 8543709960

Product Description

Product Description

TX-S65-4 CH-SNB

Product Overview:

The miniaturized 7-element multi-system satellite navigation anti-jamming integrated device is a compact satellite navigation anti-jamming integrated device designed for civilian drones and industry users. It supports BDS + GPS + GLONASS + GALILEO, with anti-broadband jamming capability and a maximum interference resistance of 6. The device integrates an antenna array, anti-jamming components, and a satellite navigation receiver, featuring miniaturization, lightweight design, and low cost.

Application Scenarios:

1. Time synchronization security in power, communications and finance

2. Navigation safety for drones, unmanned cars and unmanned ships

3. Vehicle defense navigation safety

4. High-end logistics navigation safety

Core Features & Advantages

Product function:

1. This product has 7 arrays and can resist up to 6 interferences

2.RNSS signal reception

    1) It has the function of receiving signals from Beidou, GPS, GLONASS and GALILEO navigation satellites RNSS

    2) Civil codes: BDS-B1i, BDS-B1c, GPS-L1, GLO-G1, GAL-E1

3. Anti-interference function

    It has anti-jamming functions with BDS-B1, GPS-L1, GLO-G1 and GAL-E1 frequency points, which can suppress narrowband jamming, broadband      jamming, pulse jamming, sweep frequency jamming, Gaussian jamming and other suppression jamming

4. Built-in full frequency navigation and positioning module, output information according to NMEA0183 protocol.

5. Serial port output or RF port output can be used.

6. Software upgrade

     It has the function of software upgrade, and can be upgraded through the serial port to the interference module and receiver module

7. System self-test 

     It has self-inspection and status inspection functions

8. Fire resistance function

     The anti-continuous wave power is not less than 10W

9. Security

    Overvoltage protection is available

Behaviour of electricity:

1. Frequency of work

    BDS-B1:1561.098MHz;GPS-L1,GAL-E1:1575.42MHz;GLO-G1:1602MHz

2. Anti-interference performance

    Single interference dry signal ratio: ≥110dB, three interference dry signal ratio: ≥100dB, six interference dry signal ratio: ≥90dB

3. Positioning accuracy

    Level <1.5 m

4. Speed measurement accuracy

    0.2 m / s (95%)

5. Time-giving accuracy

    ≤100ns(95%)

6. Operating voltage

    The input voltage is 6 to 33 V

7. Power consumption

     ≤25W

Shape structure:
1. External dimensions :Φ220*29.5mm

2. Weight ≤1200g

3. Color:French grey

Environmental adaptability

1. Working temperature:-40 ℃ ~ +55 ℃

2. Storage temperature:-55 ℃ ~ +70 ℃

3. Relative humidity: temperature 40 ℃; Humidity: 96%

4. Rain: meet the GJB150A rain test requirements

 Power supply / data interface

The J30J-9 ZK core connector is selected, and the pin is defined as follows:

Pin No.	name	direction	electrical  level	remarks
1	Positive pole	import	6~33V
2	Positive pole	import	6~33V
3	Negtive pole	import
4	Negtive pole	import
5	TXD0	import	TTL	Upgrade with serial port
6	RXD0	output	TTL
7	RXD1	output	TTL	Anti-interference serial port
8	TXD1	import	TTL
9	GND	import	TTL

Main Functions:

Description of connection relationship
1. The telecommunication signal connection between the product and the platform carrier is connected by low frequency data method.
2. The product has a built-in locator that can replace the conventional positioning terminal andantenna.
3. In RF signal access mode, this product replaces the conventional active antenna. Whenconnecting using the RF interface of this product, please ensure that the interface of the connectedparty does not provide an over 5V power supply to this product to avoid possible power conflictsor damage. As shown in the following diagram.
4. When using the usb to TTL tool to connect with the computer, do not plug or unplug the usb with electricity to avoid damage to the serial port

Installation and use

1.    fixed

     Install fixation with M 2 screws.

2.    supply electricity

     Use XT 30 power supply, power supply voltage 5-17V, maximum not exceeding 17V, recommended to use 12V.

3.     Locate the data connection

     1) Connect the DuPont line TTL serial port of this product to the GNSS serial port of the flight control.

         Use the accompanying data cable provided with this product to connect to the GNSS serial port of the flight controller. Connect one end of the data cable labeled TX to the RX interface of the flight controller, one end of the data cable labeled RX to the TX interface of the flight controller, and the other end of the data cable labeled GND to the GND interface of the flight controller..

    2) Use the SMA cable to connect the products RF port to the drone locators antenna port.

        Note: Either serial port or RF port is sufficient.

Interface with flight control protocol

This product outputs the nmea 0183 protocol.

Main Products

Company Profile

Aegiscloud(Shenzhen) Technology Innovation Co.,Ltd. is located in the LongGang of Shenzhen City, focusing on the research and development of low altitude unmannedaerial vehicle defense products and low altitude safety supervision systems. We arecommitted to improving the management and control system of low altitudeunmanned aerial vehicles and becoming a pioneer in escorting urban low altitudeeconomy.

The company has developed a dual end solution (remote identification of lowaltitude networked aircraft and comprehensive control of low altitude nonnetworked unmanned aerial vehicles);The drone defenseproduct series has effectively promoted the development of product categories andtechnologies in the anti drone market, leading the construction of the ShenzhenLongGang District Low altitude Supervision Pilot Center.

The company currently has a JDY (200-2000) drone jammingproduct series, covering innovative technology products suchas portable, fixed, vehicle mounted backpack, etc; At present,it has been deeply applied in a wide range of industries such as border defense, civil defense, judicial andpublic security, energy, and major security sites.

Certifications

The company has over 30 independent intellectual propertyrights, various patent certificates, software copyrights, producttesting reports, and more. Recognized as a national high-techenterprise, technology-based small and medium-sizedenterprise, and software enterprise.

Exhibitions

Packaging & Shipping

FAQ

Q1: Who are you, and what do you do?
A1: We are a R&D-driven high-tech company, specialized in the R&D, production and sales of signal amplifiers, wireless signal control systems, wireless signal countermeasure equipment, wireless signal blocking equipment, and explosion-proof jamming equipment.

Q2: Are you a manufacturer or a trading company?
A2: We are a manufacturer. Our factory is located in Longgang District, Shenzhen City, Guangdong Province, and we welcome you to visit us.

Q3: Do you accept custom-made products?
A3: Yes, we can customize products according to customers' requirements, including different frequencies, power levels, sizes, as well as custom packaging and laser-engraved logos based on specific needs.

Q4: What about the delivery time?
A4: Generally speaking, the delivery time for regular order quantities is 1 to 3 months. However, for large orders, please confirm further details with us.

Q5: What about labels and logos?
A5: Custom labels and logos are available.

Q6: What is the minimum order quantity (MOQ)?
A6: The MOQ varies by product, ranging from 1 to 20 units.

Q7: What should I do if the received product is defective?
A7: Our strict quality control ensures a 100% qualification rate. However, products may get damaged during transportation. Please share photos or videos of the defective product to let us know the specific issue. We will provide compensation accordingly, or send you replacement parts or a new product. All purchased products come with a 1-year warranty and technical support.